Stirrer Accessories
Alkali Scientific CellPro Elite High Performance
20000g Max RCF Marked Directly on Tube FreezeTechtemperature Indicator Changes Color at 0C Hi-VizGraduations Including Maximum Freeze Line Eco-Plastic Racks and/or Resealable Zip Bags E-Beam Sterilized (SAL 10-6) 500/Case The new ProSeriesCentrifuge Tubes offer maximum performance and a wide range of innovative features ProSeriesTubes feature a 20000g RCF rating an industry-first temperature indicator patch and Hi-VizGraduations that are recognizable at any viewing angle Marked at both their maximum nominal capacity as well as their maximum freeze volume these tubes have been designed with a focus on environmentalism and waste reduction Tubes are marked with standardized recycling information and are available in Eco-Plastic fold-flat racks rather than traditional styrofoam racks The flat markable screw caps feature high precision threads that make them easy to open with one hand without compromising the 95kPa rated leak-proof seal
Cole-Parmer IKA 2437700 Boss Head Clamp (h 44) For T-10 Basic Homogenizer
An accessory to keep your IKA Ultra-Turrax homogenizer processing samples consistent.
Arrow Engineering Gear Driven Overhead Stirrer, Air-Powered Model G5
The Arrow Mixing Products Model G-5 Gear-Driven Air Stirrer is a robust, air-driven solution designed to meet the demanding needs of medium to heavy-duty industrial mixing. Whether you’re mixing liquids, chemicals, or other substances, the Model G-5 delivers reliable performance with enhanced control and efficiency. This 1/2HP Gear-driven mixer has a speed range of 100-1,000 RPM's. The Model G5 comes standard with a 3/8" dia x 12" propeller shaft, 2-1/2"dia 4 Blade propeller & aluminum coupling.
Chemglass Life Sciences Agitator, PTFE, 60°, 50mm OD Blade, Fits 10mm OD PTFE Covered SS Shafts
Agitator, PTFE, 60, 50mm OD Blade, Fits 10mm OD PTFE Covered SS Shafts. Agitator blades are constructed of PTFE with a glass filled PTFE locking nut. This enables them to be attached to the shaft in any vertical position. Note: Designed for use with CG-2079-X, CG-2078-X or CG-2096-X PTFE Covered Stainless Steel type shafts
Chemglass Life Sciences Stirring Shaft, 10mm, Clockwise, Polished, Glass Agitator, Three Blade, 460mm OAL, Agitator OD 66mm, for use with 500mL Reactors
Stirring Shaft, 10mm, Clockwise, Polished, Glass Agitator, Three Blade, 460mm OAL, Agitator OD 66mm, for use with 500mL Reactors. Shaft is precision ground and polished to fit Chemglass's CG-2077-H, CG-2077-G and CG-2077-U style 10mm PTFE bearings. Designed to be used with cylindrical type reactors. The curved glass blades are spaced 120 apart and angled upward. PLEASE NOTE: STIRRER SHAFTS ARE DESIGNED FOR CLOCKWISE ROTATION.
Chemglass Life Sciences 10" Diameter Upper Agitator, PTFE, Improved
10" Diameter Upper Agitator, PTFE, Improved. Agitators are made entirely of PTFE and glass filled PTFE and are for use with 30mm OD stirrer shaft CG-2097 in 75 and 100L reactors. The 45 angle impellers are set up to stir downwards in a clockwise direction and upwards when rotated counter-clockwise. The upper agitator hub is open so that it can be positioned wherever the indents are along the 30mm shaft. Locks onto shaft with a collet hub and nut and has a glass filled PTFE safety screw. Heavy-duty blades are 6.5mm thick. PLEASE NOTE: THE LOWER AGITATOR HAS BUSHING TO ACCEPT A STABILIZING PIN FROM CG-1968-Q-02. THE PIN EXTENDS INTO THE LOWER AGITATOR AND VIRTUALLY ELIMINATES ANY WHIPPING BY STABILIZING THE STIRRER SHAFT.
Chemglass Life Sciences Stirring Shaft, 10mm, Clockwise, Polished, Glass Agitator, Three Blade, 460mm OAL, Agitator OD 50mm, for use with 500mL Reactors
Stirring Shaft, 10mm, Clockwise, Polished, Glass Agitator, Three Blade, 460mm OAL, Agitator OD 50mm, for use with 500mL Reactors. Shaft is precision ground and polished to fit Chemglass's CG-2077-H, CG-2077-G and CG-2077-U style 10mm PTFE bearings. Designed to be used with cylindrical type reactors. The curved glass blades are spaced 120 apart and angled upward. PLEASE NOTE: STIRRER SHAFTS ARE DESIGNED FOR CLOCKWISE ROTATION.
Chemglass Life Sciences Stirring Shaft, 10mm, Clockwise, Polished, Glass Agitator, Three Blade, 400mm OAL, Agitator OD 50mm, for use with 100-250mL Reactors
Stirring Shaft, 10mm, Clockwise, Polished, Glass Agitator, Three Blade, 400mm OAL, Agitator OD 50mm, for use with 100-250mL Reactors. Shaft is precision ground and polished to fit Chemglass's CG-2077-H, CG-2077-G and CG-2077-U style 10mm PTFE bearings. Designed to be used with cylindrical type reactors. The curved glass blades are spaced 120 apart and angled upward. PLEASE NOTE: STIRRER SHAFTS ARE DESIGNED FOR CLOCKWISE ROTATION.
Chemglass Life Sciences Compact Tru-Stir Shaft Coupling fits 12.7mm Shaft OD for use with Jacobs Chuck
Compact Tru-Stir Shaft Coupling fits 12.7mm Shaft OD for use with Jacobs Chuck. Similar to CG-2044 but the overall height is 1 shorter. The unique design of Chemglass's Tru-Stir stirrer shaft coupling eliminates the need to use rubber hose or universal adapters to attach your stirrer shafts to overhead stir motors. Coupling incorporates a unique helical Stainless Steel spring permitting up to 1/8 of offset misalignment. Coupling is rated for 21 in-lbs of torque without the backlash normally associated with common coil springs.
Chemglass Life Sciences Stirrer, Magnetic, Compact, Digital, Low Profile, with Timer, 100-240V, 50-60Hz
Stirrer, Magnetic, Compact, Digital, Low Profile, with Timer, 100-240V, 50-60Hz. The MST is a compact, low profile, digital stirrer with a manually adjustable speed range of 80-1500 RPM. The bright, digital display allows for very accurate setting of the stirring speed which is adjustable in 10 rpm increments. SpeedServo technology provides for constant stirring speeds even during viscosity changes.
Chemglass Life Sciences Replacement Stir Bar Magnet for 25mL Vessel
Replacement Components for CLS-1410- and CLS-1411-Series Spinner Flasks.The Replacement Shaft consists of the glass shaft only.